Peters
Peters 4 String Pitch Witch G/B-bender for lap steel and guitar
Peters 4 String Pitch Witch G/B-bender for lap steel and guitar
Regular price
$289.99 USD
Regular price
Sale price
$289.99 USD
Unit price
per
Couldn't load pickup availability
Basic Info-
The same basic functionality as the original Pitch Witch with an extended range that covers four strings instead of two. Even if you aren't using all four levers this unit gives you the ability to easily switch between, for example, open g and open d and maintain access to the 4 chord and relative minor in both tunings.
Use this device on your guitar or lap steel to get pedal steel tones without lugging around, or learning to play, a pedal steel. Even used very simply it can add a great deal of depth to your music and with a little practice you can add much more.
Machined from billet aluminum, and polished to a high gleaming shine, these benders are 100% made and assembled right here in my small Indiana shop. These were designed for lap steels, but should work on just about any electric guitar (albeit it may take a little creativity in some cases).
Instalation
These ship with all the installation hardware you need, which includes the Bender, mounting screws, pitch tuning machine screws, brass inserts, and Allen adjustment key.
For those who are interested I also offer a full installation kit at a cost of $25, which includes the correct size drill bits, center punch, and blind hole spotters, to make the installation easier.
follow this link for complete step by step video where I walk through the installation from beginning to end- https-//www.youtube.com/watch?v=4nBXzJnzVm0
Compatability-
These should fit most lap steels and guitars provided there is enough space behind the bridge to mount them, they require a bare minimum of 3.375" behind the bridge, the unit itself being 3.25" in length. If there is adequate demand I will try to make a shorter model as well, so let me know if that's something you would be interested in.
Thanks for looking! if you have any questions feel free to reach out and ask away.
Machined from billet aluminum, and polished to a high gleaming shine, these benders are 100% made and assembled right here in my small Indiana shop. These were designed for lap steels, but should work on just about any electric guitar (albeit it may take a little creativity in some cases).
Instalation
These ship with all the installation hardware you need, which includes the Bender, mounting screws, pitch tuning machine screws, brass inserts, and Allen adjustment key.
For those who are interested I also offer a full installation kit at a cost of $25, which includes the correct size drill bits, center punch, and blind hole spotters, to make the installation easier.
follow this link for complete step by step video where I walk through the installation from beginning to end- https-//www.youtube.com/watch?v=4nBXzJnzVm0
Compatability-
These should fit most lap steels and guitars provided there is enough space behind the bridge to mount them, they require a bare minimum of 3.375" behind the bridge, the unit itself being 3.25" in length. If there is adequate demand I will try to make a shorter model as well, so let me know if that's something you would be interested in.
Thanks for looking! if you have any questions feel free to reach out and ask away.
