Peters 6 String Pitch Witch G/B-bender for lap steel and guitar

Basic Info-

The same basic functionality as the original Pitch Witch with an extended range that covers 8 strings instead of two.  This is intended to fully replace the tailpiece for an 8 string lap steel. All 8 benders are not intended to be used at once, rather levers can be transferred back and fourth between rockers for different tunings and string combinations. These benders use a .4" string spacing to match the bridges that I also make.

Machined from billet aluminum, and polished to a high shine, these benders are 100% made and assembled right here in my small Indiana shop.

Instalation
These ship with all the installation hardware you need, which includes the Bender, mounting screws, pitch tuning machine screws, brass inserts, and Allen adjustment key.  

For those who are interested I also offer a full installation kit at a cost of $25, which includes the correct size drill bits, center punch, and blind hole spotters, to make the installation easier. 

follow this link for complete step by step video where I walk through the installation from beginning to end- 

Compatability- 

These should fit most lap steels and guitars provided there is enough space behind the bridge to mount them, they require a bare minimum of 3.375" behind the bridge, the unit itself being 3.25" in length.

Thanks for looking! if you have any questions feel free to reach out and ask away.