Peters Telecaster G/B-bender
Peters Telecaster G/B-bender
Regular price
$174.99 USD
Regular price
Sale price
$174.99 USD
Unit price
per
Basic Info-
This bender can be installed on most hardtail bridge equipped guitars. Modifying the bridge so the strings can pass through (as seen in the photos) is helpful in extending string life, but not necessarily required.
Use this device on your guitar or lap steel to pedal steel tones without lugging around, or learning to play, a pedal steel. Even used very simply they can add a great deal of depth and width to your music. I'm no steel player, but I use mine in home recordings all the time to create accents and a sense of space, with a little practice you can add a lot to your music with one of these.
Machined from billet aluminum, and polished to a high gleaming shine, these benders are 100% made and assembled right here in my small Indiana shop. These were designed for lap steels, but should work on just about any electric guitar (albeit it may take a little creativity in some cases).
These aren't the only pitch bender on the market, but in my opinion they are the best, not only do they cost less than comparable devices, but they are also free of many shortcomings, like substantially reduced string life and excessive lever travel, that other products struggle with (not to mention they just plain look better)
Though I have used them only as a G and B bender, these can be installed on any string pair that you want, and can be adjusted for 1/2 steps or whole steps, you could even do a step and half or two steps as long as your strings can take it. The possibilities for different tunings are endless.
Installation
These ship with all the installation hardware you need, which includes the Bender, mounting screws, pitch tuning machine screws, brass inserts, and Allen adjustment key.
follow this link for complete step by step video where I walk through the installation from beginning to end- https-//www.youtube.com/watch?v=4nBXzJnzVm0
Compatibility
These should fit most lap steels and guitars provided there is enough space behind the bridge to mount them, they require a bare minimum of 3.375" behind the bridge, the unit itself being 3.25" in length. If there is adequate demand I will try to make a shorter model as well, so let me know if that's something you would be interested in.
Use this device on your guitar or lap steel to pedal steel tones without lugging around, or learning to play, a pedal steel. Even used very simply they can add a great deal of depth and width to your music. I'm no steel player, but I use mine in home recordings all the time to create accents and a sense of space, with a little practice you can add a lot to your music with one of these.
Machined from billet aluminum, and polished to a high gleaming shine, these benders are 100% made and assembled right here in my small Indiana shop. These were designed for lap steels, but should work on just about any electric guitar (albeit it may take a little creativity in some cases).
These aren't the only pitch bender on the market, but in my opinion they are the best, not only do they cost less than comparable devices, but they are also free of many shortcomings, like substantially reduced string life and excessive lever travel, that other products struggle with (not to mention they just plain look better)
Though I have used them only as a G and B bender, these can be installed on any string pair that you want, and can be adjusted for 1/2 steps or whole steps, you could even do a step and half or two steps as long as your strings can take it. The possibilities for different tunings are endless.
Installation
These ship with all the installation hardware you need, which includes the Bender, mounting screws, pitch tuning machine screws, brass inserts, and Allen adjustment key.
follow this link for complete step by step video where I walk through the installation from beginning to end- https-//www.youtube.com/watch?v=4nBXzJnzVm0
Compatibility
These should fit most lap steels and guitars provided there is enough space behind the bridge to mount them, they require a bare minimum of 3.375" behind the bridge, the unit itself being 3.25" in length. If there is adequate demand I will try to make a shorter model as well, so let me know if that's something you would be interested in.
***********This listing is for the bender and included hardware only, not the guitar in the photos***********
This listing has a 10 day handling time. I try to keep them in stock and ready to ship, but since I run a small 2-man shop, I can't always keep up with a demand spike. That is the reason for the 10 day handling time, I will do my best to have them shipped sooner than that, but understand I may sometimes have to make more before I can ship your order.
Thanks for looking! if you have any questions feel free to reach out and ask away.
Thanks for looking! if you have any questions feel free to reach out and ask away.
Returns are accepted on benders for 14 days after customer's receipt of shipment.